Experience the pinnacle of bathing luxury with the MiPod Pro Dual Temp. This fully automatic, 1-3 person fibreglass bath offers unparallelled relaxation by combining the best of both worlds: soothing warmth and refreshing coolness, all at your fingertips. With built-in cooling and heating units, the MiPod Pro Dual Temp is your go-to solution for personalised comfort regardless of the season. Designed to adapt to your preferences, this bath is the ultimate upgrade for any home.
By integrating an intelligent ONE TOUCH START power management system, the MiPod Pro Dual Temp offers seamless transition between cooling and heating, ensuring the water is always at your ideal temperature. Whether you need to cool off after a hot day or seek a warm retreat during colder months, this bath adjusts to your needs with precision. Its user-friendly interface and 24/7 operation capability mean that relaxation is always at your command.
User Manual: iCoolSport MiPod Series 2 User Manual, iCoolsport MiPod Installation Guide
Q: How long does it take to chill an ice bath?
A: Depending on the starting temperature of the water and the ambient environment, iCoolsport's chillers can ready an ice bath, in as little as one hour. Large team pools may take up to three, however.
Q: Would it be okay to use a product like AquaSpa Sanitiser (chlorine bromine free) together with a pH reducer and Alkalinity Enhancer?
A: Yes, you can use AquaSpa Sanitiser (chlorine bromine free) together with a pH reducer and Alkalinity Enhancer.
Q: Can I use the AstralPool Mineral Guard with my MiPod Pro?
A: Yes, you can use AstralPool Mineral Guard with your MiPod Pro, but it is not recommended to use it with AquaSpa sanitiser, as the sanitiser contains PHMB. You need to select either the Mineral Guard or the AquaSpa products for your MiPod.
Q. Do I need a plumber to install my MiPod?
A. The MiPod Pro with the in-built 5000 watt chiller is a plug and play solution. However, the MiPod Pro with external 10,000 watt Turbo Mini chiller is recommended to be completed by a certified plumber as they will need to plumb the chiller to a services area either inside or outside the building, along with any of the optional sanitisation add-ons.
Q. Where should I place my MiPod or MiPod with remote chiller?
A. Ensure your MiPod pool is placed on a uniformly flat and level surface that can support the weight of the filled bath (1 kg per litre), seek advice from a qualified engineer or local council if unsure, provide easy access to all side vents and panels for servicing, and carefully consider the location for drainage and attachment points before filling the bath.
Q. What are the ventilation or airflow requirements?
A. For models with internal chillers, ensure your MiPod is placed at least 300mm away from any obstacles, walls, or structures on all sides to allow proper airflow, and keep it away from any heat sources. Provide appropriate ventilation to maintain a safe operating temperature; a well-ventilated area is required for effective heat dispersion. Avoid placing the chiller in a confined space to prevent it from reaching unsafe temperatures, which could trigger the inbuilt safety system and shut down the unit.
Q. How do I fill up my MiPod with water?
A. To fill your MiPod with water, ensure the drain valve is in the CLOSED position, use a hose to fill the pool to cover the internal top water outlet to prevent air from entering and triggering the safety system, leave enough space for water displacement to avoid overflow when users enter, especially if planning for 2 or 3 people, and note that a permanent water connection is not required.
Q. How do I drain my MiPod?
A. To drain your MiPod, simply connect a 12mm hose to the drain valve and open the valve to let the water flow out.
Q. Does the chiller need to be placed at a certain height?
A. The chiller can be located at ground level or mounted on the wall up to 5 metres above or 5 metres below the ice bath.
Q. What are the minimum clearances around the chiller?
A. The unit must be installed with minimum clearance distances maintained on all sides to prevent performance degradation or potential irreversible damage. Additionally, adequate spacing should be provided to allow for future servicing and maintenance.
Q. What pipes do I need to plumb the external Turbo Mini chiller?
A. To plumb the external Turbo Mini chiller, you will need 40mm PVC pipes and fittings for the two 40mm connections, a bypass valve if using a fixed speed pump with a higher flow rate than optimal, an inline filter to prevent debris from obstructing components, and insulation for all piping and the filter to reduce performance losses and condensation.
Q: What are the airflow requirements?
A: The Turbo unit must be installed in an open, well-ventilated area with airflow equivalent to at least 4000 cubic feet per minute through the enclosed area. The room must be enough to carry away up to 15,000 watts of heat.
Q. What’s the minimum and maximum distance between the external chiller and the ice bath?
A. The chiller should be located a minimum of 5 metres away and a maximum of 20 metres away from the ice bath.
6-12 weeks subject to demand
2-5 business days within Australia
Step into a world of personalised comfort with the iCoolsport MiPod Pro Dual Temp Plunge Pool. Click the Add to Cart button now to experience the ultimate in relaxation. Whether cooling down on a hot summer's day or warming up during the chill of winter, this bath offers year-round luxury at your command.
We now offer FREE SHIPPING within Australia for all products.
Want to know about our Returns Policy? Read more here.
As soon as you place your order you will receive an order confirmation email. This means that we have received your order in our system and pre-authorised your credit card for the purchase.
As soon as we receive your order we automatically check to confirm that your order is in stock and available for immediate shipment. If your item is on back-order or unavailable we will void the pre-authorisation and reach out to you via email to see if alternate arrangements can be made.
If your item(s) are available for immediate shipment (within 5 business days) we will process the charges and get to work preparing your order for shipment.
If your order is in stock and we process the charges to your credit card it will ship within three business days from the date of your order.
We will send you shipping confirmation within 24 hours of your order leaving the warehouse to the email address you provided when checking out.
If you do not receive shipping confirmation from us within four business days of your order feel free to follow up with us at info@proactiverecovery.com.au.
Please note that our store is set up for shipping within Australia.
If you are located outside of Australia, please contact our customer service team and we can arrange an international shipping quote for you. If you are happy with our shipping quote we will prepare an order and payment through our secure online payment gateway.
Please be aware that our products are made specifically for the Australian market. This means that they require a 240V electrical system to function correctly.
Our products have generally not been certified for use with other countries electrical safety standards but all of our products are certified to Australian standards.
For information relating to damages please see our Returns Policy.
At Proactive Recovery, we are dedicated to providing our customers with the best products and shopping experience for all their sports and muscle recovery needs.
Here are just a few reasons why you should choose us for your next purchase:
Thank you for considering us for all your sports and muscle recovery needs. Let us help you take your performance to the next level.
